DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 71

Page: 71 / 134

Programming

Operating Instructions 911-211-10 - 00.0 - 10/2020

5.11 Editing machine parameters

You use the machine parameters to define the basic machine settings.
These basic settings apply to all programs.

To edit the machine parameters:

Press the menu items

Edit

Machine parameters



The window for selecting the machine parameter group appears.

Fig. 48: Editing machine parameters

Press the desired parameter group.



The individual parameters of this group are displayed.

Press the desired parameter.



The window for modifying the parameter value opens.

Set the parameter to the desired value (



p. 44

There are 6 machine parameter groups:

Symbol

Parameter group

MP1 - Configuration

General settings

MP2 - Limit values

Limit values for speeds and positions

MP3 - Needle thread monitor

Behavior after thread breaking

MP4 - Thread cutting

Speed, position and tension

MP5 - Thread clamping

Starting angle

MP6 - Counters

Settings for program and bobbin counters

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands