DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 51 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 49
5.7.1 Changing the bobbin
Fig. 34: Changing the bobbin
To change the bobbin:
1. Press the Bobbin change button.
2. Change the bobbin (

p. 49 ).
3. Use the Forwards and Back buttons to move to the point where
sewing is to continue.
4. Press the Continue sewing button.

The program jumps back to the start screen and sewing of the seam
continues from the selected point.
5.7.2 Bobbin change without a request from the program
If you wish to independently insert a new bobbin without being requested
to do so by the program, then you have to press the
Bobbin change
button on the start screen.
This will inform the program that a new bobbin has been inserted, causing
it to resume counting thread consumption starting with the full bobbin
capacity.
5.7.3 Updating the bobbin capacity
To update the bobbin capacity:
1. Press the button Bobbin change on the start screen.

The counter for the bobbin capacity begins anew with a full bobbin.