DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 37 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 35
5.3 Starting the software
After it was switched on, the machine performs a reference run. After this,
the start screen is shown for a few seconds.
Fig. 18: Starting the software (1)
Here you can select the user interface language or use
Service
to
quickly access the Multi test menu.
Extras Display options: full-
screen and zoom
Technician menu:
Adjustments, system
information and tests
Full screen on / off

p. 45
Zoom on / off

p. 45
Service Settings

p. 75
System information

p. 82
Multi test

p. 78
Initialization
and update

p. 83
Manufacturer (for DA personnel only)
Correction Short-term sewing with
other values Thread tension

p. 47
Speed

p. 48
Buttons on the start screen
Continue sewing the contour from a particular
point Repair mode

p. 50
Allow for a manual bobbin change Bobbin change

p. 49
Reset counter to a particular value Reset counter

p. 52
Menu items in popup menus
Menu item Function Sub-items Sub-items Described on
(1) - Button language selection (2) - Button Service
① ②