DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 30 / 148

Operation
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 28
13. Turn the handwheel until the looper hole (10) is accessible.
14. Insert the thread from the right to the left through the looper
holes (10) before pulling it out by approx. 3 cm.
15. Press down and lock into place the thread bobbin case
retainer (9).
16. Insert the covering plates of the throat plate on the right and
the left.
4.6 Threading the reinforcement tape
(610-10 only)
Proper setting
Facing the head cover, the reel of reinforcement tape must rotate
clockwise when unwinding.
Fig. 11: Threading the reinforcement tape (1)
(1) - Reel of reinforcement tape
(2) - Reel holder (3) - Counter bearing
①
②
③