DURKOPP ADLER 610-10, Operating Instructions Manual

Page: 102 / 148

Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021 100
7.5 Setting the working height
The working height can be adjusted between 750 mm and 950 mm
(measured to the upper edge of the tabletop).
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing is possible.
When loosening the screws, ensure
that your hands are not jammed.
CAUTION
Risk of musculoskeletal damage from
incorrect setting!
The operator can sustain musculoskeletal
damage if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.