DURKOPP ADLER 512-211-01, Service Instructions Manual

Page: 9 / 82

Safety information
Service Instructions 512-211-01/532-211-01 - 00.0 - 06/2016 7
2 Safety information
This section contains basic information for your safety.
Read the information carefully before setting up, programming, maintain-
ing or operating the machine.
Make sure to follow the information included in this section. Failure to do
so can result in serious injury and damage to the machine.
2.1 Basic safety instructions
Only authorized personnel should use the machine. Anyone working on
the machine should read the operating manual first.
The machine should only be used in accordance with the manual.
The operating manual should be available at the machine's location at all
times.
Observe the generally applicable safety and accident prevention regula-
tions and the legal regulations concerning industrial safety and environ-
mental protection.
If you are using parts from other suppliers, please also observe the safety
instructions and the operating manual provided by the respective manu-
facturer.
All warnings on the machine must always be in legible condition and may
not be removed. Missing or damaged labels should be replaced immedi-
ately.
In the following situations, the machine must be disconnected from the
power supply using the main switch or by disconnecting the power plug:
• Threading
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing service work, maintenance work and repairs
Check the machine during use for any externally visible damage. Stop
working as soon as you notice any changes to the machine. Report any
changes to your supervisor. A damaged machine should no longer be
used.
Machines or machine parts that have reached the end of their service life
must not continue to be used. They have to be disposed of correctly and
in accordance with the applicable statutory provisions.
Only qualified specialists may set up the machine. Anyone setting up the
machine must have read the set-up instructions first.