MAL_Vero_VE6414/15.04.1
9
10
11
12
Slide the vanity under the
washbasin.
Tighten mounting nuts with a
wrench until the washbasin is
stable.
Gap between washbasin and
vanity should be minimum 3/8“.
Using the screwdriver, adjust the
vanity mounting hinge system
clockwise.
Screw two set screws until desired
leveling of the vanity has been
reached.
13
14
15
16
Using the appropriate bit for the
wall material, drill pilot holes.
The plastic anchors provided are
for concrete wall applications.
For wood stud walls bolts should
be screwed into wood backing.
Install the vanity drawers.
Apply silicon bead between
washbasin and the wall.
