15
Problem
Potential cause
Solution
see page
Otherwise:
Problem with steam
generator.
Contact Customer Serv-
>
ice and describe how
the light is flashing.
The
"Service" button
flashes briefly twice/
three times / four times.
Problem with steam
generator.
Contact Customer Serv-
>
ice and describe how
the light is flashing.
Press the "Service" button to acknowledge the service message.
!
Maintenance
10.
Change the limescale filter
10.1
How often?
Change the limescale filter as soon as the "Service" button flashes, but no later than
12 months after initial start-up.
How?
1. Changing the limescale filter
Prerequisite: New limescale filter (Art. No. 790592 00000 0000 from Duravit or
PURITY C Quell ST C50 through Brita) ordered and on hand.
Open the maintenance door.
>
Change the limescale filter using the procedure described in the instructions for
>
the limescale filter.
2. Reset the water meter.
Press the "Steam" and "Light" buttons simultaneously for 2 seconds.
>
All buttons light up, one flashes.
Press the "Steam bath" and "Service" buttons for 2 seconds.
>
All buttons flash.
Press the "Light" and "Service" buttons for 2 seconds.
>
The buttons light up in succession; the water meter has been reset.
Press any button.
>
You have now left the "Settings" menu.