Important information
About the mounting instructions
These mounting instructions come as part of the
Duravit Shower WC and should be read carefully prior to
installation.
Explanation of the key words and symbols
DANGER!
At high risk of fatal hazards or
serious injuries
NOTE!
To avoid property damage
Link to the
Electrical Installation section
Link to the
installation information
in this section
Link to the
Water Installation
section
Inspection (e.g. for scratches)
Inspection to collect water
Do not kink hose
Target readership and qualifications
The Shower WC and associated water connection may only
be installed by qualified plumbers. The electrical installa-
tion may only be carried out by qualified electricians.
NOTE!
Local installation regulations, country-specific standards
and the low voltage directives must be observed at all
times.
NOTE!
Do NOT install the Shower WC in rooms where there is a
danger of frost. The room temperature must not be less
than 4 °C.
Safety instructions
DANGER!
Risk of fatal electric shock.
>
Do NOT remove individual Shower WC components.
Installation instructions
Please read pre-installation data sheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
The Shower WC unit installation is described in separate
instructions.
4
Screwing on the floor-standing toilet mounting
bracket (Diagram 4)
>
Please observe the enclosed instructions.
6
Fixing the water connection (Diagram 6)
>
Continue with step 8 to install the T-profile.
8
Fixing the water connection (Diagram 8)
>
Continue with step 10 to install without the
T-profile.
13
Installing the cistern to the toilet (Diagram 13)
>
Please observe the enclosed instructions.
22
Fixing the toilet to the mounting bracket
(Diagram 22)
>
Please observe the enclosed instructions.
6
SensoWash_MAL_SWC_54025/14.05.4
en