DuraVision FDX1501 Setup Manual Download Page 14

1

En

gli

sh

SAFETY SYMBOLS

This manual and this product use the safety symbols below. They denote critical information. Please read them 
carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can be life 

threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury and/or property 

or product damage.

Indicates an attention to be required.

Indicates a prohibited action.

Compatible Resolutions

The monitor supports the following resolutions.

Analog Input (D-Sub)

Resolution

Applicable Signals

Vertical Scan 

Frequency

Dot Clock

640 × 400

NEC PC-9801, PC-9821 AP2

up to 70 Hz

80 MHz

(Max.)

640 × 480

VGA, VESA

up to 75 Hz

720 × 400

VGA TEXT

70 Hz

800 × 600

VESA

up to 75 Hz

1024 × 768

*

VESA

up to 75 Hz

Digital Input (DVI-D)

Resolution

Applicable Signals

Vertical Scan 

Frequency

Dot Clock

640 × 480

VGA

60 Hz

65 MHz

(Max.)

720 × 400

VGA TEXT

70 Hz

800 × 600

VESA

60 Hz

1024 × 768

*

VESA

60 Hz

A graphics board in conformance with VESA standard is required.

Recommended resolution

About Setup Manual and User’s Manual

Setup Manual

(this manual)

Describes basic information ranging from installation of the 

monitor to using the monitor.

User’s Manual of 

this monitor

*

Describes the application information of the monitor such as 

screen adjustments, settings, and specifications.

User’s Manual of 

Touch Panel Driver

*

Describes the installation and use of the touch panel driver.

*

 PDF file on the CD-ROM (Installation of Adobe Reader is required.)

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, 
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior 
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been 
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are 
subject to change without notice.

Summary of Contents for FDX1501



























































Reviews: