fig.3
ASSEMBLE DOOR
7
SELECT:
3 x 1.850 m Door Sheets (Narrow)
2 x 0.945 m Door Top/Bottom Flashings
2 x 0.495m Door Top/Bottom Flashings
4 x 1.850m Door Side Flashings
2 x 1.160m Door Brace Flashings
2 x 0.915m Door Brace Flashings
6 x Hinges
1 x Padbolt Support Flashing
2 x 1.180 m Door Brace Flashings
108 x Rivets
STEP 1:
•
Lay out door sheets on a flat surface
making sure narrow pans are on the
outside.
•
Rivet sheets together in the centre en-
suring ends are flush with each other.
STEP 2:
•
Position door side flashings and top
and bottom flashings and assemble
door as shown, ensuring narrow
face of flashing is on the front as
per fig.1
STEP 4:
•
On the back of the door, place door braces in posi-
tion as shown in
fig.4.
•
Ensure that the top and bottom ends of the braces
are under the door flashings as shown in
fig.5
and
opposite ends of the braces overlap in the middle.
•
Rivet door brace flashings onto back of door as
shown. Where possible, rivet from front of door
.
STEP 3:
•
Attach hinges to door side flashing using rivets provided.
Ensure hinge is flush with back of door, and 60mm in from
each end as per
fig.2.
•
Using six rivets, attach padbolt support as shown in
fig. 3.
fig.2
NARROW PANS
SMALL DOOR:
•
Assemble small door in same way as large door using 0.495 m top and bottom flashings.
•
Before screwing on 0.915m door braces, attach weather strip flashing to back of door side flashing using six rivets
ensuring it protrudes 20mm out from door side.
Hinges
fig.1
fig.5
fig.4
Summary of Contents for Gurdian Sheds GG101
Page 1: ...ASSEMBLY INSTRUCTIONS GG101 BASE SIZE 3 190m x 3 020m...
Page 2: ......
