FIT DOORS
14
YOUR DURATUF GARRISON SHED IS NOW COMPLETE. RELAX
…...
FIT PADBOLT
•
Rivet Padbolt to door and keeper onto Door Jamb as shown.
FIT BACK PADBOLT
•
Rivet back pad bolts to pad bolt supports then rivet padbolt
supports to back of L/H door (Top and bottom).
•
Using 10mm drill bit, drill hole into top and bottom timber
plates.
STEP 1:
•
Place the doors in the panel (In open position,
approx 25mm below top of top plate). Using
two rivets, rivet the top and bottom hinges to
the Door Jamb Flashing, ensuring door closes
properly.
•
Fit remaining rivets.
•
Repeat with second door.
x3
x3
x3
x3
x3
x3
IMPORTANT—
CLEAN UP
REMOVE ALL DRILL FILINGS FROM ROOF, WALLS AND CHANNELS THOROUGHLY. FAILURE TO DO THIS
WILL RESULT IN CORROSION AND COULD THEREFORE VOID THE WARRANTY
.
Summary of Contents for GARRISON PS62
Page 1: ...ASSEMBLY INSTRUCTIONS PS62 BASE SIZE 2 020m x 0 685m...
Page 2: ......
