•
Drill
•
Drill Bit 3.5mm
•
Drill Bit 6mm (for clear roof panel only)
•
Hex Drive 5/16
•
Riveter (free Duratuf riveter supplied in kit)
•
Hammer
•
Nail Punch
•
Tape Measure
•
Ladder or Saw stool
•
Spanners x 2
•
String Line
•
Tin Snips
•
Skillsaw and Jigsaw (for floor only)
•
Masonry Drill and 10mm Masonry Bit (for Bolt Down Kit only)
•
Read all instructions carefully.
•
Identify all parts and check quantities against checklist.
•
If you are making your own floor refer to Raised Base Plate section
now.
•
Do not attempt to build your shed in high winds.
•
Beware of sharp edges.
•
Protect your eyes and ears.
•
Use electric tools with care. Use a Safety Trip Switch.
•
It is easier and quicker if this shed is erected by two people.
•
Your shed must be level. Achieve this by either levelling the ground
or by using blocks.
•
If you shed is to be positioned on wet or damp ground, we recom-
mend that your shed is raised up off the ground slightly.
Tools Required:
Select your site:
Safety:
Before you start:
ASSEMBLY INSTRUCTIONS
2
