RADIO SYSTEM CHECK
• Turn the transmitter on, then turn the receiver on.
• Turn the transmitter wheel to the right—the front wheels should turn to the right. If not, move the steering servo reverse switch.
• When running, adjust the steering trim so the truck track straight.
• Pull the throttle trigger to make sure the carburetor opens fully and the throttle linkage functions properly without binding.
• Adjust the throttle trim so the carb closes completely at idle.
• Push the trigger and roll the truck to make sure the brakes are applied.
• To shift the Warhead from forward to reverse, flip the toggle switch to the opposite position.
• IMPORTANT! Before shifting from forward to reverse or reverse to forward, bring the truck to a complete stop.
!
CHECK THE RADIO SYSTEM
FOR PROPER FUNCTION
BEFORE EACH RUN
6
BODY INSTALLATION
• TIP! Cut out the rear window for easy access to the rollbar/handle.
• TIP! Adjust your body mounts high to achieve that “monster” look.
• Decal the body to your liking.
Use the photos on the box as
a reference.
• Install the body onto the
chassis using four body clips.
