Duratrax WarHead EVO, Operation Manual

Page: 4 / 24

FINISHING
FINISHING
THE
THE
W
W
ARHEAD EV
ARHEAD EV
O
O
• Remove the receiver battery holder.
• Install (4) “AA” batteries.
• Reinstall the receiver battery holder and lid.
TRANSMITTER PREPARATION
RECEIVER BATTERY INSTALLATION
• Install eight “AA” batteries into transmitter, making sure the polarity is correct.
• Insert the antenna into the top of the transmitter and tighten.
• Turn the transmitter on and check the battery light. If the red light glows
steady, turn off the transmitter. If the red light blinks, the batteries are low and
should be replaced.
4