14
Use threadlock on all
metal-to-metal screws.
Make sure all bearings
are fully seated.
Thread the ball ends
onto the turnbuckles
equally. Adjust after
assembly is complete.
Fill the diff case with quality oil or grease.
NOTE:
Fill the case until the bevel gear
shafts are covered. Filling the case
higher will cause oil to spill out when the
other side of the diff is installed.
There are several different viscosities
of oil available, which allow you to tune
your truck’s handling to particular track
conditions. Grease may be substituted if
you don’t have access to diff oil.
