![Duratax Onyx100 Instruction Manual Download Page 5](http://html1.mh-extra.com/html/duratax/onyx100/onyx100_instruction-manual_2541446005.webp)
5
ERROR INDICATORS AND TROUBLESHOOTING GUIDE
Several safety features are included in this charger to protect itself and the battery against certain unwanted
conditions, as follows:
5-YEAR LIMITED WARRANTY - *U.S.A and Canada Only
DuraTrax warrants this product to be free from defects in materials and workmanship for a period of five (5) years
from the date of purchase. During that period, DuraTrax will, at its option, repair or replace without service charge any
product deemed defective due to those causes. You will be required to provide proof of purchase (invoice or receipt).
This warranty does not cover damage caused by abuse, misuse, alteration or accident. If there is damage stemming
from these causes within the stated warranty period, DuraTrax will, at its option, repair or replace it for a service charge
not greater than 50% of its then current retail list price. Be sure to include your daytime telephone number in case we
need to contact you about your repair. This warranty gives you specific rights. You may also have other rights, which
vary from state to state.
For service on your DuraTrax product, warranty or non-warranty, send it post-paid and insured to:
HOBBY SERVICES
3002 N. Apollo Drive Suite 1
Champaign, IL 61822
(217) 398-0007
Email: [email protected]
*For warranty and service information if purchased outside the USA or Canada, see the additional warranty information
insert (if applicable) or ask your retailer for more information.
Entire Contents Copyright © 2009
Made in China
DTXP4190MNL v1.0
TROUBLESHOOTING CHART
LED ACTION
PROBLEM AND SOLUTION
Flashes once every 2 seconds
90 minute safety timeout occurred. Charge current setting is too low. Battery might have internal
problem and require replacement.
Flashes twice quickly
The battery is connected backwards. Reverse connections.
Flashes 3X quickly
The voltage on the input is out of the 11-15V range. Check the voltage on the input, and adjust
as necessary.
Flashes 4X quickly
The output has been shorted. Disconnect the battery. Disconnect the charger from input power,
then re-connect the charger. Properly re-connect the battery to the charger.
Summary of Contents for Onyx100
Page 8: ......