DURASTAR.COM
16
LOUVERED AIR FLOW
SETTING THE LOUVER ANGLE
While the unit is on, press the SWING or DIRECT button on the remote control to set the louvered
direction of airflow.
SWING (AUTOMATIC)
Press the SWING button to start the automatic movement of the louver. Press again to make it
stop.
DIRECT (FIXED)
Press the DIRECT button to adjust the fixed angle of the louver. Each press will adjust the louver
by 6°. Press the button until the desired angle is reached.
CAUTION
Do not put your fingers in or near the blower and suction side of the unit. The high-
speed fan inside the unit may cause injury.
Louvers
NOTE
Do not move louver by hand. This will cause the louver to become out of sync. If this
occurs, turn off the unit and shut off the breaker for 30 seconds, then restart the unit. This
will reset the louver.
