Instruction Manual
PEM3024 Power Unit - V1.0
www.durapac.com
Page 7 of 9
6.2.3
Extend and retract the cylinder several times without putting a load on the
system. Air will be released into the pump reservoir.
6.2.4
Recheck oil level after removing air.
6.3
Changing Hydraulic Fluid
For best results, change fluid once a year or every 300 hours of use
6.3.1
Repeat Steps 6.1.1 to 6.1.3 (above).
6.3.2
Pour used fluid into a sealable container.
6.3.3
Repeat Steps 6.1.3 to 6.1.6 (above).
6.3.4
Dispose of fluid in accordance with local regulations.
6.4
Storage
6.4.1
When not in use, depressurise and disconnect the power unit from the
application.
6.4.2
Wipe clean thoroughly and store in a clean, dry environment. Avoid
temperature extremes.
6.4.3
For transportation or long storage, replace the air vent plug with the
shipping plug.
