6
Installation and Usage
•
This kind of socket can be reconnected. Before opening the socket box, make sure the power supply
is halted.
•
When changing the connecting wire, please use the following type of wire: H07RN-F 3G 1.5 mm². The
length of the wire is at least 1.4 meters.
•
Please make sure to correctly connect the green/yellow grounding safety lead wire to the connecting
location with grounding safety lead wire mark.
•
The wires must be led to the connection terminal in the shortest possible way Grounding safety lead
wire should be 8 mm longer than required.
•
The lead wire must be connected firmly to the binding post and all the lead wires should be inside the
binding post.
•
The spray-proof rubber packing and the sealing ring must be mounted in place precisely. Fasten the
screws properly.
•
Use the supplied remote control to switch the sockets on/off separately. With appropriate batteries
inserted, the RC automatically connects to the corresponding socket.
•
When exchanging the battery, be sure to maintain the correct polarity as indicated on the inside of
the battery compartment. Exlusively use batteries of the equal type.
Technical Data
Article #.
10028985
10028986
10028991
10028987
10028988
10028992
10028989
10028990
10028993
Supply Line
1.5m
3.0m
5.0m
Voltage
250V AC, ~50Hz
250V AC, ~50Hz
250V AC, ~50Hz
Maximum Load
10A, 2500W
10A, 2500W
10A, 2500W
IP Protection Class
IP44
IP44
IP44
Radio Frequency (RC)
433.92MHz
433.92MHz
433.92MHz
Range (RC)
70m (max.)
70m (max.)
70m (max.)
Battery Type (RC)
8LR932 1811A 23A (ca.28,5mm×Ø10,3mm) 12 V
Scope of Delivery
Device, remote control, instruction manual
