Note: To ensure that your shed withstands high winds,
you will need the following reinforcement.
High wind area installation instructions
Parts needed
(not included)
:
CODE DESCRIPTION
QTY
S4
Dia. 4.2 x 16mm. (5/32” x 5/8”)
Sheet Metal Screw
48
S5
M6 x 40mm. (1/4” x 1 1/2”)
Anchor Bolt
32
M6 Anchor Bolt
Base ‘U’ Channel
Concrete
Attach each side panel
(SP )
on the bottom to
the Base U-channel. Using a dia. 3mm (1/8”) drill
with a power drill, make two equal distance holes
on the Base U-channel through the Side Panel.
Drive a self tapping screw
(S4)
through the Base
U-channel to the Side Panel.
Repeat this for every Side Panel. See blowup.
S4
SP
Base U-channel
SP
37
1
2
3.0mm.(1/8”)
Using a carpenter square, line up corners. Align base
bars, mark the concrete at the holes in the
base
and
drill concrete with suitable concrete bit to accept
1/4” x 1 1/2” (M6 x 40mm) anchor bolts.
(Qty - 32Nos. not provided).