GENERAL SPECIFICATIONS
Wheel Nut Torque
l
Tighten wheel bolts or nuts every 50 miles for the first 200 miles and after every change in
wheel mounting.
l
Unless otherwise specified. Torque specifications are only applied to fixed clearance
applications such as clamped rubber bushings and shoulder bolts. All others are assembled
with a snug fit to prevent excessive binding of suspension parts.
LUBRICANT
Grease = High Temperature EP Grease Oil = SAE 90
ELECTRICAL
Magnet Amperage (at least 12 volts) 4.5K Centerline Brake = 2.25 amps
All others = Approximately 3.0 amps
ATTACHMENT
TO
FT. LBS. TORQUE
Flange Nut 3/4
Dual Wheel to Hub
375 -425
Flange Nut 5/8
Dual Wheel to Hub
275 -325
Cone Nut 5/8
Single Wheel to Hub
175 – 225
Cone Nut 9/16
Single Wheel to Hub
120 – 140
Cone Nut 1/2
Single Wheel to Hub
80 - 95
Description
Size
Torque ft. lbs.
Use
U-Bolt
½”
40 – 60
4.5K – 7.0K
½”
40 – 60
3.5K
9/16”
60 – 80
5/8”
80 – 90
8K
Backing Plate Nuts & Bolts
3/8”
20 – 40
2.5K – 3.5K
7/16”
20 – 40
2.5K - 3.5K
1/5”
85 – 90
8K
Suspension Nuts & Bolts
3/8”
Snug fit
9/16”
Snug fit
7/8”
Snug fit
1”
130 - 150
22
Summary of Contents for AL15
