manualshive.com logo in svg

Duraline Systems Vistacool NSVC-1, Installation Manual & Owner'S Manual, Page: 3 / 16

Share
Download
Duraline Systems Vistacool NSVC-1 Installation Manual & Owner'S Manual Download Page 3

3

VistaCool is a patent-pending system designed to eliminate the 
need for autoclave condenser/waste bottles and condensation 
tanks by cooling the exhaust water and automatically sending it 
directly down the drain� With the use of a simple adapter kit, the 
VistaCool Model V7502 is designed to enable the Midmark/Ritter 
M9 and M11 autoclaves to use fresh deionized/distilled water for 
each sterilizing cycle—converting these chambered autoclaves to 
operate like quick-turnaround, cassette systems� 

Introduction

VistaCool can be used with:

Midmark/Ritter M3
Midmark/Ritter M9* 
Midmark/Ritter M11*
SciCan STAT

IM

 2000 

SciCan STAT

IM

 5000

We recommend that a professional technician or plumber familiar with dental/medical offices perform the 
installation since interface with a cold water line and drain is involved� He/she should be familiar with local 
plumbing codes and techniques for successful dental/medical equipment installations� Failure to install 
correctly could result in water leaks, leading to possible water damage� It is the responsibility of the system 
owner to validate the use of all equipment within its installed environment�

Please keep the Installation Guide & Owner’s Manual handy for future reference and ensure that anyone 
responsible for operation and maintenance of the system is familiar with all details contained in this manual�

Please return the Warranty Registration form or register online immediately upon installation�

IMPORTANT INFORMATION

 

For System Owners

Please read this entire manual before proceeding with installation and operation, and always follow local 
plumbing codes�

VistaCool systems have only been verified for installation on the compatible autoclaves (listed above)� 
Please check with the manufacturer of other brands of autoclaves or contact Vista Research Group before 
connecting to other than SciCan or Midmark/Ritter autoclaves� See page 13 for autoclave-specific instructions�

VistaCool Model V7502 has been verified for installation on Midmark/Ritter M9 & M11 units with the 
use of the S7560 adapter kit� Only M9, M9D, M11 and M11D (-02X, -03X) units with 

green

 displays can 

be connected to VistaCool� First generation models with 

red

 displays (-0XX) are not compatible�

The VistaCool tank must be installed so that the top of the water tank is ABOVE the connection to the 
drain adapter� Please see page 12 for important tank positioning details�

Check for leaks and run the autoclave(s) for at least two consecutive cycles after installation to 
ensure the system is operating properly�

IMPORTANT INFORMATION

 

For System Installers

* Requires Model V7502 and S7560 adapter kit

Summary of Contents for Vistacool NSVC-1

















Reviews:

No comments