5
Operating Instructions and Parts Manual
80-375
17 PIECE
AIR TOOL KIT
®
®
05/15
2015 DURALAST
WARNING
Any excess oil in the motor is immediately expelled
from the exhaust port. Always direct exhaust port away
from people or objects.
MAINTENANCE
WARNING
Disconnect the Impact Wrench or Air Ratchet Wrench
from air supply before changing accessories, servicing
or performing maintenance.
1. Replace or repair damaged parts. Use genuine
parts only. Unauthorized parts may be dangerous
and will invalidate the warranty.
2. If the air system does not have an oiler then
lubricate the Impact Wrench or Air Ratchet
Wrench daily with a few drops of air tool oil into
the air inlet.
3. Blow out air line to clear it of accumulated dirt and
moisture.
4. Connect tool and operate tool to allow oil to be
carried to the interior of the tool.
5. Clean the Impact Wrench and Air Ratchet Wrench
after use.
6. DO NOT use worn or damaged accessories.
IMPORTANT
When securing wheel nuts it is important to set
the regulator to the minimum setting, then use a
torque wrench to set fastener torque. Wheel nuts
must be tightened to the vehicle manufacturer’s
recommendation.
TROUBLESHOOTING
Problem
Cause
Remedies
Unit will
not work
Plugged air inlets
Remove fitting
and clean
Interior is rusted
Disassemble,
clean, lube and
reassemble
Unit lacks
power
Low air supply
Check hoses,
tanks, etc.
Lack of lubrication Lube properly
and retry
Tool runs
slowly
Dirty and gummed Disassemble,
clean, lube
Components worn Disassemble,
determine parts
requiring
replacement
and repair
