DuraLabel Toro User Manual Download Page 21

GraphicProducts.com | 800-788-5572    

 

Certifications

 | 

19

FCC

This equipment has been tested and 

found to comply with the limits for a 

CLASS A digital device, pursuant to Part 

15 of the FCC Rules. Operation is subject 

to the following two conditions: 

(1) This device may not cause harmful 

interference, and 

(2) this device must accept any interference 

received, including interference that may 

cause undesired operation. 

These limits are designed to provide 

reasonable protection against harmful 

interference when the equipment is 

operated in a commercial environment. 

This equipment generates, uses, and 

can radiate radio frequency energy, and 

if not installed and used in accordance 

with instructions may cause harmful 

interference to radio communications. 

Pursuant to Part 15.21 of the FCC Rules, any 

changes or modifications to this equipment 

not expressly approved by Graphic Products 

Company may cause harmful interference and 
void your authority to operate this equipment. 

CE

Graphic Products Inc. hereby declares 

that this device is compliant with Radio 

Equipment Directive (RED) 2014/53/EU.
A copy of the CE Declaration of Conformity, 

including device frequency bands and 

maximum radio frequency power, is 

available upon request. To obtain a copy 

please call or email; (800) 788-5572 or  

[email protected].

RoHS

This product complies with EU Directive 

2011/65/EU of 8 June 2011 as amended 

by EU Directive 2015/863 if 31 March 

2015 and including amendments to the 

exemptions in Annex II.

11

CERTIFICATIONS

ICES-003 Class A Notice

This Class A digital apparatus complies 

with Canadian ICES-003(A)/NMB-3(A).

This device complies with Industry 

Canada’s license-exempt RSS standard(s). 

Operation is subject to the following two 

conditions:

(1) This device may not cause harmful 

interference, and 

(2) This device must accept any 

interference received, including 

interference that may cause undesired 
operation.

WEEE

The symbol (right) means that 

your product and/or its battery 

shall be disposed of separately 

from household waste, 

according to the WEEE Directive 

(2012/19/EU) and national legislation. 

When this product reaches it end of life, 

take it to a collection point designated by 

local authorities. Separating and recycling 

the product and/or the battery at time 

of disposal, will help to conserve natural 

resources and ensure that the equipment 

is recycled in a manner that protects 
human health and the environment. 

*

IFETEL

La operación de este equipo está sujeta 

a las siguientes dos condiciones: (1) es 

posible que este equipo o dispositivo 

no cause interferencia perjudicial y (2) 

este equipo o dispositivo debe aceptar 

cualquier interferencia, incluyendo la que 

pueda causar su operación no deseada.

*This item may or may not be certified for these 

compliance marks. Graphic Products’ equipment 

is certified on a case-by-case basis. For more 

information, please contact your account manager or 

email [email protected].

Summary of Contents for Toro

























Reviews: