Durafly Messerschmitt BF.109E-4, Instruction Manual, Page: 3 / 16

2
1. Out of the box your BF.109e comes with reinforced foam hinge. However before assembly can
begin, each hinge line must be fiexed back and forth 5-6 times to reuce tension and load on the
servo. Do this for all control surface before continuing.
2. Insert one half of the carbon tail spar into one of the horizontal tail pieces before sliding this half
into the tail slot of the fuselage. Now, installl the remianing tail piece(A). Secure both halves in
place with the supplied 2.3X6mm screws(B) and try install the tail brace into place with no glue,
then glue the braces into place when they fit properly(C). This intallation is self aligning, but do
double check to ensure aquel aligment to the vertical tail an wing.
3