A292
www.tsicustomerservice.com
5
6. The appliance must not be positioned directly underneath a socket.
7. Do not use the appliance in rooms less than 43 sq. ft. area.
8. Heater should not be located below a socket-outlet.
The heater is fitted with a thermal overload protector which will switch off the heater in case
of accidental overheating (ex. obstruction of air intake and outlet grilles, motor turning slowly
or not at all).
To reset, disconnect the plug from the power for a few minutes, remove the cause of
overheating then plug the appliance in again.
WARNING
To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a
source of power during unpacking and assembly. The cord must remain unplugged whenever
you are adjusting/assembling the heater.
If any part is missing or damaged, do not attempt to use or plug in the power cord until the
missing or damaged part is correctly replaced. To avoid electric shock, use only identical
replacement parts when servicing double-insulated tools.
PACKAGE CONTENTS
A
PART
DESCRIPTION
QUANTITY
A
Heater
1
