10
www.tsicustomerservice.com
A353
3
Drilling the Holes
1
Removing the Mounting Bracket
2
Choosing a Wall Location
Remove the Mounting Bracket (A) from the back of the
Fireplace (B) by removing the two pre-attached Screws
(CC) at the top back of the unit.
Choose a wall location to attach the Mounting
Bracket (A). Position the Mounting Bracket (A)
in the desired location.
Use a level to align the bracket and mark the four holes
with a pencil.
Drill six 7/25 in. (7 mm) holes in the wall.
Insert the Wall Anchors (BB) into the holes using
a hammer.
BB
A
B
CC
A
Operation
Installation - Wall Mounting
Floor
