4. Using the Inst
ant Power Charger
4.1.
Make sure the Inst
ant Power Charger is charged prior to use (see
Section 3, Charging the Inst
ant Power Charger
, for instructions on
how to charge).
4.2.
Connect a USB cable comp
atible with your device to the “OUT” port of
the Inst
ant Power Charger
. Device-specific USB cables are not included
but are readily available at most electronics stores.
The USB to mini-USB
cable included in the p
ackage is comp
atible with newer Motorola
cellular phones, Blackberries and many digit
al cameras. Please note that
most newer Motorola cellular phones will not charge using st
andard USB
cables. For these phones please make sure to use the included USB to
mini-USB cable.
4.3.
Connect the other end of the USB cable to your device.
4.4.
T
urn the Inst
ant Power Charger switch to the “ON” position.
4.5.
The
LED st
atus light
will turn green, indicating that the battery is powering and charging your device.
The LED st
atus light will turn red when the battery has been depleted and needs to be recharged.
4.6.
When the Inst
ant Power Charger is not in use, make sure to turn the switch to the “OFF” position.
This will prevent the battery from self-discharging.
5. S
pecifications
6. Safety Precautions
This battery is designed and built to the highest safety st
andards and will protect the user from
hazards when used as directed.
The battery cont
ains high power circuit
s; therefore it is import
ant for
users to read these precautions carefully
.
•
Do not disassemble.
•
Always store in a cool dry place.
•
Do not short-circuit.
•
Use only with USB-powered devices.
•
O
nly charge the battery from a USB2.0 comp
atible port.
•
A
void placing in direct sunlight, next to heat-sensitive materials or in places where
extreme heat may result.
•
Do not submerge or expose to water or liquids.
7. W
arranty
If not completely satisfied with this battery
contact BatteryFuel at [email protected].
The manufacturer
guarantees this battery against defect
s in materials and workmanship under normal
use and service
for three years from the initial date of purchase. Should any device be damaged due to a battery
defect,
the manufacturer
will rep
air or replace at our option if it is sent
back to the manufacturer
with the battery
, post
age prep
ai
d.
1. Introduction
Thank you for purchasing the DURACELL
Inst
ant Power Charger
.
This is a 5 volt universal
battery used to power and charge any USB-powered electronic device such as cellular phones, digit
al
cameras, PDAs, port
able game players, MP3 players and many more.
2.
Package Includes:
•
USB to mini-USB cable
•
Inst
ant Power Charger
3.
Charging the Inst
ant Power Charger
3.1.
Connect the USB to mini-USB cable to the
“IN” port of the Inst
ant Power Charger
.
3.2.
Connect the other end of the USB output cable to
your notebook’
s USB port or any other USB2.0
comp
atible port.
3.3.
The Inst
ant Power Charger
’s charge light will turn red,
indicating battery is being charged.
3.4.
When the battery is fully charged, the charge ligh
t
will turn green.
Disconnect the Inst
ant Power Charger from the
USB
cable.
The battery is now ready for use.
2
2
1
1
Charge Light
“IN” Port
S
tatus Light
“OUT” Port
ON/OFF Switch
3.2: Connecting the cable’
s other
end to available USB2.0 port
Output V
olt
age
5 V
olt
s DC
Input V
olt
age
5 V
olt
s DC, 1
Amp maximum
Product Diagram
4.2: Connecting S
tandard USB
Cable
4.4:
This is the st
atus light that will glow
when the Universal Battery is charging
and/or powering your device.
3.1: Connecting the USB to mini-
USB cable to the “IN” Port of the
Universal Battery
3.3 - 3.4:
A
red light here on the Universal Battery
indicates that the Universal Battery is
being charged. When the battery is fully
charged, this light becomes green.
