17
Overload Shutdown
If you connect an AC load that is rated too high
(see Table 3) or a load that draws excessive surge power, the Inverter
shuts down. The overload error code ‘
E03
’ will show on the digital
display.
Overheating Shutdown
The Inverter shuts down automatically if it
exceeds its safe operating temperature. The overheating error code
‘
E04
’ will show on the digital display.
Shutting the inverter off
•
If you are going to disconnect the battery, turn the inverter off first.
•
Turn the inverter off by holding the switch until the display turns
off.
Operating normal loads
The Inverter is capable of continuously powering most 120 V AC
products with the following power rating maximums:
Important:
If the inverter is connected to a vehicle’s lighter socket or
12 V outlet when an overload occurs, the lighter socket fuse can blow.
If that happens, replace the fuse with a similar one as recommended in
your vehicle’s manual and follow the section, “Connecting for loads
over 150 W”, if your AC product is rated more than 150 watts. The
overload error code ‘
E03
’ may show on the digital display.
Duracell_Digi_400.book Page 17 Friday, August 31, 2007 3:24 PM
