background image

IB-PH5435-WC-E-032805

CALLER ID FEATURES

The caller

s  phone number and/or name  will not appear in the

following  cases:
 - When the call is made through a telephone company which

does  not  offer  Caller  ID  service  (including  international
calls),  the  display  will  show 

  UNAVAILABLE 

.

 - When the call is 

blocked

. For privacy reasons, many states

allow callers the option to prevent his or her telephone data
from being  displayed on the  other party

s Caller  ID display.

The  display  will  show 

  PRIVATE  CALL 

.

 - If  the  call  is  from  an  office  which  uses  multiple  lines,  the

displayed  phone  number  may  not  match  the  number  you
use to call  that extension.

 - If you have picked up the phone before the second ring.

You can look through the data in the Caller ID list to check the
numbers and names of the calls received.
1.Press the DOWN button. The data of the newest call appears

for 20 seconds.

2.Press the DOWN button to view data from new to old, and the

UP button from old to new.

When  you  have  reached  the  last  (newest)  call  by  pressing
the  UP  button, 

  END  OF  LIST 

  appears.  If  you  press  UP

button again, the display will show the first (oldest) call.

When  you  have  reached  the  first  (oldest)  call  by  pressing
the  DOWN  button, 

  END  OF  LIST 

  appears.  If  you  press  the

DOWN button again, the display will show the last (newest) call.

You  can  view  the  Caller  ID  list  during  conversation  also  by
following the  steps above.

NOTE

:If batteries are weak, the LOW BATTERY INDICATOR 

is displayed.  Replace  new  batteries  as  soon  as  possible;

otherwise the Caller ID list and memories may be erased.

10

Understanding the Caller ID Service

Caller  ID  allows  the  caller

s  phone  number  to  be  shown in  the

display  after  the second  ring of  the  call,  also in  most cases,  the
caller

s name, calling time and date. This information will be stored

automatically.
In order to enjoy this feature, you must first subscribe to the Caller
ID service.
To use the call back feature, set the area code (refer to page 7).

When You Receive a Call

The  display  as  right  illustrated
will  show  all  the  information
when you receive a call.

Viewing the Caller ID List

The phone stores the data of the last 70 calls received. It keeps
track of all calls received, even if they were not answered.

IB-PH5435-WC-E-032805.pmd

4/1/2005, 12:28 PM

12

Summary of Contents for PH-5435



















Reviews: