5-2
L6655EA
2. Initial Setting
General
1. Enter the Service mode. (See page 5-1)
2. Press "VOL
p
" button on the service remote control
unit. Display changes "C/D," "7F," "LANGUAGE,"
"ACCESS CODE," "SOUND TYPE," "VIDEO
TONE," "FM MODE," "V-OUT," "VIDEO," "AV
MEMO," "STABLE SOUND," "FILTER," "300," and
"YUV MEMORY" cyclically when "VOL
p
" button is
pressed.
3. To set the following each data value, press "CH
o
/
p
" buttons on the service remote control unit.
7F --- Set to "FF."
LANGUAGE --- Set to "FPA."
ACCESS CODE --- Set to "OFF."
SOUND TYPE --- Set to "MTS."
VIDEO TONE --- Set to "ON."
FM-MODE --- Set to "OFF."
V-OUT --- Set to "OFF."
VIDEO --- Set to "V1/V2."
AV MEMO --- Set to "ON."
STABLE SOUND --- Set to "OFF."
FILTER --- Set to "ON."
Adjusting the monitoring time --- Set to "500."
YUV MEMORY --- Set to "OFF."
3. AV Memory Setting data
General
1. Enter the Service mode. (See page 5-1)
2. When “AV MEMORY” setting to “ON” (refer to “2.
Initial Setting”), press "VOL
o
" button on the ser-
vice remote control unit. Display changes "SPORT
CNT," "SPORT CLR," "SPORT SRP," "NEWS
CNT," "NEWS CLR," "NEWS SRP," "MOVIE CNT,"
"MOVIE CLR," and "MOVIE SRP" cyclically when
"VOL
o
" button is pressed.
3. To set the following each data value, press "CH
o
/
p
" buttons on the service remote control unit.
SPORT CNT--- Set to "48."
SPORT CLR--- Set to "30."
SPORT SRP--- Set to "34."
NEWS CNT--- Set to "39."
NEWS CLR--- Set to "30."
NEWS SRP--- Set to "28."
MOVIE CNT--- Set to "43."
MOVIE CLR--- Set to "26."
MOVIE SRP--- Set to "24."
