Durabase VE 50 TA, Instruction Manual, Page: 31 / 37

4. It is better not place object on the top of appliance which is magnetic,
heavy, or be filled with water. Electronic components may not work steadily
if water gets inside. Do not store object which is costly or impressible
to temperature and , e.g. serum, bacterin and so on.
5.The refrigerant of this product is R600a,which is inflammable.
So,make sure not to damage the cooling system during
the transportation and installation.
INSTRUCTIONS OF INSTALLATION
1.The refrigerator should be located in a completely flat surface , Leave 5~10
cm between each side of the appliance and the wall,
and leave 30 cm between the top of the appliance and
the ceiling .
2.Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity may
cause stain.
3.Pulled out the bottom panel before installation.
4.The appliance can be adjusted by rolling its two
legs in front the bottom when it is unstable. Rolling
in clockwise can rise up the machine.
5.The location should be firm and flat. An un-securely
position may cause noise and libration
(a)The noise may be increased if the
floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
6.Make sure the adjustable legs are clung to the floor, and set the appliance
slope backward slightly for keeping the doors closed tightly.
INSTRUCTIONS OF OPERATING
PLACEMENT OF FOOD
1.There should always be some space between
items inside for air circulation.
2.Food should be kept in sealed package to avoid
becoming dry or with odour.
3.Hot food should be cooled down before placing
into the appliance. Otherwise, interior
temperature and electronic consumption
will increase.
4.Reduce the frequency of door opening can
efficiently low down the electronic consumption.
Warning:
Do not use any electronic equipment inside the appliance.
3