3
Sunburst Trellis
Insert lattice (part 7) through 27½" center cross rail (part 4). Insert one end of lattice into 27½" bottom
cross rail (part 3) and other end into 27½" top cross rail (part 5). Insert one end of three cross rails into
corresponding holes in left post (part 1). Insert bent top (part 6) into left post. Insert one 11" tube and
one 9½" tube into left outer hole of top cross rail, with 11" tube on outside (left side). Insert one 9½"
tube into hole in middle of top cross rail. Insert one 9½" tube and one 11" tube into right outer hole of
top cross rail, with 11" tube on outside (right side). Insert free ends of tubes into bent top. Insert free
ends of bent top and cross rails into right post (part 2). Using six 1¼" screws, screw together trellis. Be
sure that all parts are fully inserted into legs before.
If combining with Model# 11153 Large Green Lattice Planter or Model# 11154 Large White Lattice
Planter to make a planter trellis, use a straight blade screwdriver to pop off two 2" sq. post caps of one
long side of the planter and slide trellis over the planter legs. Using two 1" painted self-tapping screws
from trellis ground anchor kit (part 9), fasten trellis to planter.
