8
MAINTENANCE
WARNING:
To reduce the risk of injury, turn unit off and disconnect it form power source before
installing and removing accessories, before adjusting or when making repairs. Be sure the
switch is in the “OFF” position. An accidental start-up can cause injury.
WARNING:
Blow dirt and dust out of all air vents with clean, dry air at least once a week. To
minimize the risk of eye injury always wear ANSI Z87.1 performing this.
WARNING:
Never use solvents or other harsh chemicals for cleaning the non-metallic parts for
the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get inside the tool never immerse
any part of the tool into a liquid.
CLEANING
Maintenance and cleaning of the inner parts like brushes, ball bearings, gears or others,
must be carried out only by an authorized customer service workshop.
