manualshive.com logo in svg

Duplo DP-22L, Instruction Manual

Share
Download
Duplo DP-22L Instruction Manual Download Page 20

19

3

2

1

Before Using 

This Machine

1

Part Names and Their Functions

Printer Appearance

q

!1

w

e

r

t

y

u

i

!0

o

No.

Name

Function

q

Document cover

Keeps the document in contact with the document glass plate.

w

Feed tray descend switch

Press to lower the feed tray.

e

Feed pressure adjuster lever Use to adjust the paper feed pressure.

r

Side guides

Slide to match the width of the paper.

t

Feed tray

Load paper in this tray.

y

Support tray

Pull out when using large paper sizes.

u

Power switch

Press to switch the power on and off.

i

Cabinet (Option)

Place the printer on this stand.

o

Castor locks

Lock the printer in position on the floor. Always lock the castor
locks when installing the printer.

!0

Front cover

Open to replace ink pack and drum unit, etc.

!1

Control panel

Displays operations and statuses, and sets functions.

Reference

page

32, 38,

103

35

34

34

34

25, 26

—

—

84, 92

22

Summary of Contents for DP-22L
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands