59
When the power is turned on, all
the size lamps of the side-stapling
and saddle-stapling blink.
After stapling, the paper does not
move forward, or does not move
forward smoothly and the paper
jams.
The paper does not infeed the
folding plate
(Especially when there are about
20 sheets of paper.)
• This occurs if the power was
turned off while performing
memory processing operations
f o r t h e p a p e r s i z e u s e d
previously.
• Check if the stapler and clincher
positions are aligned.
• Check if the side joggers are set
too narrow.
• Check if the side joggers are
attached raised.
• Check that the leading edge of
the paper is curled upwards.
• Call the desired size.
• Align the stapler and clincher
positions.
• Refer to “4-8. Raising the Binding
Accuracy”.
• Lower the side joggers and
attach them again.
• Straighten the paper.
• If the clearance adjusting plate is
set too narrow, set the clearance
widely.
11. TROUBLESHOOTING GUIDE
Problem
Correct
Check
Within 6 mm
