DUOTONE TRUST BAR, User Manual

Page: 13 / 24

15
DUOTONE
TRUST BAR MANUAL
ENGLISH
SERVICE AND MAINTENANCE
2. The release mechanism is triggered by pushing the release grip down.
3. The safety leash is then completely released from your harness.
Pictures
38
+
39
+
40
page 73
5. SERVICE ET MAINTENANCE
CAUTION: IT IS NECESSARY TO RINSE YOUR TRUST BAR AFTER EACH USE.
5.1. RINSING THE IRON HEART
Rinse the Iron Heart with clean water. Be sure to open it right up and clean the inside. Move the Roto
Head back and forth to remove any obstructions or residues from the ball bearing and interspaces.
Use the Suicide Ring to also pull out the red safety line (about 15 cm) and rinse it to remove sand
from the passageway in the Iron Heart.
Picture
41
page 73
5.2. LINES
CAUTION: DEPENDING ON THE USAGE, SIGNS OF WEAR AND TEAR CAN OCCUR ON YOUR TRUST
BAR. BECAUSE OF THIS, WE ADVISE THAT YOU CHECK YOUR LEADER LINES FOR STRESS MARKS
EVERY 100 HOURS AND REPLACE IF NECESSARY. TO REPLACE THE LINES YOU’LL NEED TO REMO-
VE THE END CAPS FIRST. YOU CAN FIND AN IN-DEPTH TUTORIAL ON OUR WEBSITE.
Never expose your Trust Bar to temperatures higher than 70°C. This level of heat can damage
the structure of the lines and cause them to shrink. Carry out checks on a regular basis and see
whether the lines are the same length. If they are not the same length, you can stretch them or
compensate for the difference by replacing the supplied pigtails. You can find guidance and more
maintenance tips at www.duotonesports.com