Overall Dimensions
Positioning Sensors
Installing A Sensor
Carbon monoxide has specific gravity of 0.97 and is therefore
slightly lighter than air.
However for positioning purposes, at the concentrations of
carbon monoxide relating to the detector alarm thresholds, the
resultant combination of carbon monoxide and air will neither
rise or fall.
The best position to mount the CO200 Duct is 1.6m above
ground level. The image below shows the suggested position
for the CO200 Duct in a boiler room.
For car parks, 1.6m above ground level is still recommended.
If you require assistance regarding locating sensors please call
our Droitwich factory on (01905) 797989 or fax a drawing of
your application to (01905) 774296 and we will advise
accordingly.
The sensors must be mounted as shown below with
the sintered head pointing vertically down.
Important Notes
The installation of this gas detector does not release
the user from observing all the regulations
concerning the characteristics, installation and the
use of gas appliances; the ventilation of the
environment and the elimination of combustion
products in accordance with local recommendations,
regulations and byelaws.
For any damage caused to people, property or
animals
resulting
from
incorrect
connection,
installation or application of this gas detector Duomo
will not be held responsible or liable.
1600
Replacing Sensor
When replacing sensors
NEVER
seperate a sensing
head from the PCB. The sensor has been calibrated
using only that particular board and therefore will not
function correctly with any other.
Carbon
Monoxide
100mm
100mm
60mm
80mm
80mm
Fixing 6.5O
Model
CO2000lus
Power
Supply
12/24V.
dc±
10%
Electrical
Input
110mA@13,8V.
Detection
Carbon
Monoxide
Sensitivity
from
30
to
300ppm
Model
CO200
PowerSupply
12/24V.dc±
10%
ElectricalInput
110mA@13,8V.
Detection
CarbonMonoxide
Sensitivity
from30
to300ppm
Model
CO200
Power Supply
12/24V. dc± 10%
Electrical Input
110mA@13,8V.
Detection
Carbon Monoxide
Sensitivity
from 30 to 300ppm
Model
CO200
Power Supply
12/24V. dc± 10%
Electrical Input
110mA@13,8V.
Detection
Carbon Monoxide
Sensitivity
from 30 to 300ppm
w:
www.duomo.co.uk
-
e:
-
t:
01905 797989
-
f:
01905 774296
|
©
Duomo (UK) Ltd. 2007