Duo Collection 10 50 5020, Original Instructions Manual, Page: 35 / 46

35
B+: The output signal brightness control,
every time you press this button, the
brightness series add 1, altogether 25
levels.
B-: The output signal brightness control,
every time you press this button, the
brightness series, minus 1, altogether
25 levels.
S+: The output signal speed control, every
time you press this button, the speed series
add 1, altogether 100 levels.
S-: The output signal speed control, every
time you press this button, the speed series
minus 1, altogether 100 levels.
2. Power supply management:
Stop to use remote more than 20s, the remote will enter the stand by
state (untouchable tate); slightly shake once, then the remote will come
back to the normal working state (touchable State).
3. Indicator light instruction:
Slightly shake once, then the remote will came back to the normal
working state (touchable state).
1) The remote is idle or send, signal when the PWR bright, PWR is off,
then means the remote is in standby state;
2) RF is bright, than means remote is sending signal, off means there is
no signal sending.
Application/touch remote
GB