JC95B JERRY CANTRELL CRY BABY
®
WAH
3
BASIC OPERATION
POWER
The Jerry Cantrell Cry Baby® Wah is powered by one 9-volt battery
(remove bottom plate to install), the Dunlop ECB003 9-volt adapter,
or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies.
OPERATION
1.
Run an instrument cable from your guitar to the JC95B’s
INSTRUMENT jack and another instrument cable from the JC95B’s
AMPLIFIER jack into your amplifier’s input.
2.
Push the toe of the pedal down until you feel a “click” to turn the
pedal on/off.
3.
Rotate the FINE TUNE knob clockwise for a brighter toe-down
response or counterclockwise for a darker toe-down response.
4.
Rock your foot back and forth on the pedal to hear the vocal,
expressive tones that the Cry Baby Wah is famous for.
