Page 12 of 16
System LST Installation - Second Fix
Ensure panel radiator is clean or that the finned element is clean and fins are not crushed, before fitting
casing.
Diagram 5
Position the side plates at either end of the back plate using the studs for alignment (see detail in Diagram 4).
Please note that the studs are for alignment only and no fixings are required to be attached to these studs.
Screw the side plates through the back plate into holes “B” prepared during first fix stage.
Diagram 6
Fit the Bottom rail between the side plates. To do this you may need to gently push the side plate outward
(being careful not to permanently deform it) in order to get the rail to clear the side plate (Detail 1 in Diagram
5). The bottom rail should be engaged with the studs (Detail 2). Two M4 nylock nuts, provided should be
threaded onto the studs and screwed down to secure it.
