3 … 8
2 … 8
MC • Karl Dungs
, Inc.
• HP
SV 10020/604 • Edition 2017.05 • P/N 264712
Specification
Max. Operating Pressure
100 PSI (689 kPa) factory rating
60 PSI (413 kPa) as per ANSI Z21.21/
CSA 6.5 C/I and 100 PSI as per
CGA 3.9
Burst Pressure Rating
500 PSI (3447 kPa)
Ambient / Fluid Service
Temperature
CSA -20 °F to +140 °F
-29 °C to +60 °C
Factory +5 °F to +140 °F
-15 °C to +60 °C
Storage Temperature
-40 °F to +185 °F
-40 °C to +85 °C
Gases
Dry, natural gas, propane, butane;
other noncorrosive gases as well as
waste-gases and bio-gases contain-
ing up to a maximum 0.1 % by volume
(1000 ppm) of H
2
S, dry.
Intended for gaseous fuels only. Can-
not be used with non-compressible
fluids (liquids) of any kind.
(A “dry” gas has a dew point lower
than + 15 °F and its relative humidity
is less than 60 %.)
Materials in contact with Gas
Housing: Anodized Aluminium and
Steel, free of non-ferrous metals
Sealings on valve seats: NBR-based
rubber.
°F
Electrical Ratings Available
24 VDC
Power Consumption
45 W
Operating Time
100 % duty cycle
Closing Time
< 1 s
Opening Time
< 1 s
Gas Connection Type
2” flat face flange per ANSI B16.5
Class 150
EN 161
HPSV 10020/604
Normally closed automatic shutoff valve. Fast opening, fast closing.
Strainer
Built-in 1 mm stainless steel mesh
strainer, installed upstream of the
valve seat.
[PSI]
NEMA
Degree of Protection
NEMA 4/IP65
Suitable for hazardous locations
Class I, Division 2, Groups C and D,
Temperature code T4A.
[
V
]
[
A
]
[
Hz
]
[
VA
]
Gas
Vibration Resistance
According to MIL 810 Profile Vibration
Electrical Connection
Quick disconnect according to MIL
ACS02A-10SL-04P-003
According to CSA C22.1 Part 1
