1 … 8
MC • Karl Dungs
, Inc.
• HP
SV 10020/604 • Edition 2017.05 • P/N 264712
CSA Certified: File No. 1010989
ANSI Z21.21 / CSA 6.5
C/I Marking
CGA 3.9
HPSV 10020/604
High Pressure Safety
Shutoff Valve
Installation Instructions
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Installation Position . . . . . . . . . . . . . . . . . . . . . . Page 3
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Painting Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Protection from Radiant Heat . . . . . . . . . . . . . . Page 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Valve Leakage Test . . . . . . . . . . . . . . . . . . . . . . . Page 6
Flow Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Accessories & Replacement . . . . . . . . . . . . . . . Page 8
Approvals
1, 2, 3 ...
= Action
•
= Instruction
Explanation of symbols
On completion of work on the
safety shutoff valve, perform a
leakage and function test.
Please read the instruction be-
fore installing or operating. Keep
the instruction in a safe place. You
find the instruction also at www.
dungs.com If these instructions
are not heeded, the result may
be personal injury or damage to
property.
Any adjustment and application-
specific adjustment values must
be made in accordance with
the equipment manufacturers
instructions.
Attention
Check the ratings in the specifi-
cations verify sure that they are
suitable for your application.
This product is intended for instal-
lations covered by, but not limited
to, the following fuel gas codes:
CSA B149.1 (for Canada), the
International Fuel Gas Code, and
NFPA 54 or the following equip-
ment codes and standards: CSA
B149.3 (for Canada) or NFPA 37.
The installation and maintenance
of this product must be done
under the supervision of an ex-
perienced and trained specialist.
Never perform work if gas pres-
sure or power is applied, or in
the presence of an open flame.
[
V
] [
A
]
[
Hz
]
[
VA
]
IFGC
CSA
UL
ANSI
NFPA
Safety
first
O.K.
Warning: During normal op-
eration, coil is getting hot. (max.
176 °F / 80 °C)
USA
CDN
