www.dunelm.com
Back panels (G) are screwed inside internal slats of two side
panels using screws (S) x14.
Attach magnetic catches (O) x6 to the top and bottom of
the unit, using screws (T) x12.
Insert hanging rails (C & C1) into the unit.
Insert shelf supports (V) x12 into the unit.
Step 7:
Step 8:
Step 9:
Insert shelves (C2) x3 into the unit.
Step 11:
Attach metal plates (P) x6 onto the corners of the doors using screws (T) x12.
Attach handles (N) x2 to the doors (E & E2) using bolts (Q) x2.
Attach handle (N) x1 to the door (E1) using bolt (Q1) x1.
Step 10:
Attach big angle hinges (I) x2 and hydraulic damping big
angle hinges (I1) x4 to the doors (E & E2) using screws (R) x12.
Attach straight angle hinge (I2)x1 and hydraulic damping
straight angle hinges (I3) x2 to the door (E1) using screws (R)
x6.
E
E1
E2
