DUNE HD TV-102, Quick Start Manual

Page: 11 / 36

11
English
Use the RC buttons LEFT, RIGHT, UP, DOWN, ENTER, RETURN to navigate through the player menu. Use the POP
UP MENU RC button to show the list of available commands. Use the INFO RC button to show the information about
the selected item.
Quick Setting of Video Output Mode
The “ REC ” RC button allows quick setting of video output mode without entering the player setup
menu. This way of video output configuration may be required if you see no picture on the screen after
connecting your player to a TV.
Press the
REC RC button and then one of the RC buttons 1, 2, 3, 4, or 5 to switch to one of the following video output
modes respectively:
1. Composite PAL
2. Composite NTSC
3. HDMI, 480i, 60 Hz
4. HDMI, 720p, 60 Hz
5. HDMI, 1080i, 60 Hz
After you see a picture on the TV, press the ENTER RC button, and then go to the player setup menu to perform a
more precise configuration of the video output mode if needed.
NOTE: The procedure of quick setting of video output mode can not be used during playback and in some other
cases. To ensure this procedure can be used, switch the player off, then switch the player on, and the wait about 1
minute to ensure the player loading is finished. After that press STOP RC button to ensure playback is stopped. Then
use REC RC button.