Pre place 2 ½” (64mm) screws in the pre drilled holes of
your assembled heater guard.
ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
12
Hang the heater on the two upper screws.
Install the two ¼" x 1" hex head lag screws (supplied with
the heater) into the two lower mounting holes.
Ensure heater is level, tighten all 4 hex head lag screws to
lock the heater in place.
El
ec
tr
ic
H
ea
te
r I
ns
ta
lla
ti
on
17
Roughly assemble the pieces of the heater guard.
Stand the 2 Assembled side pieces of the heater guard
on edge with pre-drilled holes on the bottom and place
the heater front supports on top.
Make sure front supports are flush to the sides and
secure with (2) – 1 ½” screws per side.
Dundalk LeisureCraft Cedar Mini Pod Sauna
Assembly Instructions
