Duncan Twin Tube Blue SFX-11 User Manual Download Page 2

2

Safety Precautions

 

Hazardous voltages are present. For your protection, and to reduce the risk 

of electric shock and danger to personal health, please observe the following 

safety precautions when setting up and using your Twin Tube Blue. Most of this is 

common sense, but please read it anyway.

Your Twin Tube Blue is designed to work with typical power systems utilizing a 

three-prong outlet. To reduce the risk of electric shock, do not plug your Twin 

Tube Blue into any other type of power system. Contact your facilities manager 

or a qualified electrician if you are not sure what type of power is supplied 

to your building or performance stage. Do not use your Twin Tube Blue with 

amplifiers or other gear that have two prong AC plugs. Do not overload wall 

outlets, extension cords, or multiple power strips as this can result in a risk of fire 

or electric shock. 

Never open the chassis. Do not attempt to tamper with or service your Twin Tube 

Blue yourself. You’re just asking for trouble. Opening or removing the cover may 

expose you to dangerous voltage or other hazards, which could result in serious 

injury or death – not to mention damage to the Twin Tube Blue. Wouldn’t that 

suck? Refer all servicing to qualified service personnel.

Do not block or cover the side vents on your Twin Tube Blue. Never push objects 

of any kind through openings in the equipment. No drummer jokes, please. 

Dangerous voltages may be present. Conductive foreign objects could produce 

a short circuit that could cause fire, electric shock, or damage to your Twin Tube 

Blue. 

Never place a Twin Tube Blue near a radiator or heat register. Failure to follow 

these guidelines can cause overheating and affect the reliability of your Twin 

Tube Blue.

Unplug your Twin Tube Blue from the wall outlet before cleaning. Do not use 

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not use your Twin Tube Blue near water - for example, near a bathtub, 

washbowl, kitchen sink, or laundry tub; in a wet basement; near a swimming 

pool; on stage with water effects or precipitation; and the like. Do not expose 

the Twin Tube Blue to dripping or splashing liquids and do not place objects 

filled with liquid on or near your Twin Tube Blue (yes, unfortunately, this includes 

bottled malt beverage liquids). And for heaven sakes, don’t use it while you’re 

sitting on the can… OK, enough of that.

Summary of Contents for Twin Tube Blue SFX-11













Reviews: