Trails Button:
When set to ON the effect will continue to decay naturally when bypassed. (No new repeats
will be generated). In this mode Dark Sun uses a buffered bypass. When set to OFF, the effect will cut off as
soon as the effect is bypassed. In this mode Dark Sun is true-bypass.
**PARAMETER VALUES** You can find out the current value for any knob using the Trails button. Press and
hold down the Trails button, then turn the control you wish to read. The display will show the current setting
of that control, without changing it. The rotary controls will show a value of 1-8 for Delay Mode and 1-4 for
Routing.
**mS/BPM Delay Time** You can toggle between milliseconds and BPM (beats per minute) to set delay
time on Dark Sun by holding the Trails button while powering ON the pedal. If you wish to switch back,
simply repeat the process.
Bypass Footswitch:
Turns the effect on and off. LED will light when effect is engaged.
Tap/Preset Footswitch:
Defaults to TAP mode, tap the footswitch to set the tempo of the delay. LED will
blink in time with current tempo. To change to PRESET mode press and hold the footswitch until the
LED becomes solid, then tap the footswitch to scroll through the four presets in the current bank. After 2
seconds with no input the mode will revert to TAP.
16
15
14
Summary of Contents for Dark Sun
Page 1: ... D A R K S U N DIGITAL DELAY REVERB U S E R S G U I D E ...
Page 7: ...1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...
Page 22: ......
Page 23: ......
