When you re using "Low-Cut" modules the bass controls will have less effect on your
sound because the module s rolling off much of the bass response. The 'Presence'
module will be greatly affected by the treble control (See pages 10-11 Preamp Modules
for other tone you can get with different modules)
TREBLE TONE CONTROLS:
These controls you change the high-end response of your
amp Each is a high-pass passive that can reduce the signal level 0-38 db with a 6 db per
octave slope Turning the dial clockwise increases high-end response: counter reduces
the high-end response
MID TONE CONTROLS:
These controls let you change the volume of mid-range within
a range of 0-12 db. Turning the dial increases your midrange volume.
BASS TONE CONTROLS:
These controls let you change the low-end response of your
amp. Each is a low-pass passive filter that can reduce the signal level 0-15 db. Turning
the dial clockwise increases the low-end response.
9) REVERB:
These controls let you set the amount of reverberation you want in your
sound. Turn the reverb control clockwise to increase the amount of reverb and
counter-clockwise to decrease.
Some players prefer no reverb or one channel only. Can you imagine changing channels
with a footswitch and using another switch to turn the reverb on and off? With the two
independent reverb controls, you can see as much reverb, as you like on one channel
and turn the other channel's reverb “off'” by simply turning the control counter clockwise
That way you can concentrate on your playing and avoid the footswitch distraction.
10) CHANNEL SELECTOR BUTTON:
This pushbutton lets you change channels
manually The L.E.D 's show you which channel is 'on' If you prefer to use a footswitch,
